德國BAM原裝進口。配合DIN耐磨試驗使用，在鞋材(橡膠)的耐磨性測試之前,應使用我司提供的DIN標準膠檢驗其砂粒是否符合測試要求，過于鋒利請用鋁塊修正,使用多次后發現未達到標準磨量要求必須要更換一張新的砂紙。
      在adidas GE-27 德國工業標準(DIN) 磨擦(DIN Abrasion)...標準中被指定使用。
      
      The Reference Material(BAM-E002) delivered by BAM. Working Group "Elastomers and Reference Materials" (6.31), is prepared for test purposes and tested in accordance with DIN EN ISO/IEC 17025:2005
      
      The Abrasive Cloths Number 12093 to 12104 are in conformance with ISO 4649,Annex A.
      
      They are stamped with the following marks:
      
       BAM (producer)
       Abrasive Cloth (article)
       ISO 4649;Annex A (standerd;clause)
       Number: XXXXX (number of cloth)